.svg)
AI-320-330- 45k
Article:
CR.357.320.330
Price:
Production: Russia (Cryotec)
Liquid nitrogen dispenser AzotInject AI-320-330-45k with a quarter “trunk” of 330 mm is designed to create excess pressure and an inert environment in soft containers during the filling and preparation of “stable” liquids and food products by injecting a dose of liquid nitrogen into each bottle ( container) at speeds up to 60,000 bottles/hour. It is used for any packaging containers on bottling lines for water, oil, non-carbonated drinks, etc. Injection of liquid nitrogen allows you to study “hot filling” without the cost of heat treatment, create an inert environment in the packaging to increase the shelf life of products, create excess pressure and thereby avoid losses due to “non-commodity” type of production.
| Cryogenic liquid | liquid nitrogen LN2 |
| Capacity of the built-in cryovessel | 8 l |
| Liquid nitrogen dose volume (min-max) | 0.1-1.0 ml |
| Dosing head drive: | |
| 1. Linear motor | |
| Dosing speed | up to 60,000 doses/hour |
| Changing the dose | software with PLC |
| 2. Pneumatic cylinder | |
| Dosing speed | up to 45,000 doses/hour |
| Changing the dose | mechanical |
| Pressure in the pneumatic network | ≥ 6 and ≤10 bar |
| Air flow (at a pressure of 6 bar and a dosing rate of 5,000 doses/hour) | 100 l/hour |
| Supply voltage / Frequency | 220V/ 50Hz |
| Electrical power consumption | 110 W/hour |
| Overall dimensions including stand | 620x1530x2300 mm |
| Weight of installation without liquid nitrogen | 36 kg |
| Operation mode | continuous, 24/7 |
| Ambient temperature | from +5˚С to +40˚С |
| Relative humidity | up to 98% |
Популярное
YDS-10-125-FH
Dewar Vessel YDS-10-125-FH with a volume of 10 liters with additional side and bottom reinforcement for increased safety during transportation and storage of biological samples.
Glasses-holders for cryostraws Margaritka (Daisy)
Plastic glass "Margaritka" (d=65mm, h=135mm) with multi-colored pencil cases/visotubes
YDS-3-YS
The YDS-3-YS 3L Dewar flask has a sidewall and bottom layer to provide increased safety during the transportation and storage of biological samples.
Cans
Аluminum holders for tubes 290 mm long, 10 mm wide.
EC-600/8
EuroCyl 600/8 pressurized cryogenic vessel with capacity of 673 liters for transportation and storage of cryogenic liquids. For laboratory and industrial applications.
Cryomassage roller KМV-35
Cryomassage roller KMV-35 for cryomassage procedures with liquid nitrogen in beauty salons.
