.svg)
AI-320-170-45k
Article:
CR.357.320.170
Price:
Production: Russia (Cryotec)
Liquid nitrogen dispenser AzotInject AI-320-170-45k with a quarter “trunk” of 170 mm is designed to create excess pressure and an inert environment in soft containers during the filling and preparation of “stable” liquids and food products by injecting a dose of liquid nitrogen into each bottle ( container) at speeds up to 60,000 bottles/hour. It is used for any packaging containers on bottling lines for water, oil, non-carbonated drinks, etc. Injection of liquid nitrogen allows you to study “hot filling” without the cost of heat treatment, create an inert environment in the packaging to increase the shelf life of products, create excess pressure and thereby avoid losses due to “non-commodity” type of production.
| Cryogenic liquid | liquid nitrogen LN2 |
| Capacity of the built-in cryovessel | 8 l |
| Liquid nitrogen dose volume (min-max) | 0.1-1.0 ml |
| Dosing head drive: | |
| 1. Linear motor | |
| Dosing speed | up to 60,000 doses/hour |
| Changing the dose | software with PLC |
| 2. Pneumatic cylinder | |
| Dosing speed | up to 45,000 doses/hour |
| Changing the dose | mechanical |
| Pressure in the pneumatic network | ≥ 6 and ≤10 bar |
| Air flow (at a pressure of 6 bar and a dosing rate of 5,000 doses/hour) | 100 l/hour |
| Supply voltage / Frequency | 220V/ 50Hz |
| Electrical power consumption | 110 W/hour |
| Overall dimensions including stand | 620x1530x2300 mm |
| Weight of installation without liquid nitrogen | 36 kg |
| Operation mode | continuous, 24/7 |
| Ambient temperature | from +5˚С to +40˚С |
| Relative humidity | up to 98% |
