AI-320-330- 45k

Article: CR.357.320.330
Price:
Production: Russia (Cryotec)
Russia (Cryotec)
Description Characteristics
Avenue

Liquid nitrogen dispenser AzotInject AI-320-330-45k with a quarter “trunk” of 330 mm is designed to create excess pressure and an inert environment in soft containers during the filling and preparation of “stable” liquids and food products by injecting a dose of liquid nitrogen into each bottle ( container) at speeds up to 60,000 bottles/hour. It is used for any packaging containers on bottling lines for water, oil, non-carbonated drinks, etc. Injection of liquid nitrogen allows you to study “hot filling” without the cost of heat treatment, create an inert environment in the packaging to increase the shelf life of products, create excess pressure and thereby avoid losses due to “non-commodity” type of production.

Cryogenic liquid liquid nitrogen LN2
Capacity of the built-in cryovessel 8 l
Liquid nitrogen dose volume (min-max) 0.1-1.0 ml
Dosing head drive:  
1. Linear motor  
Dosing speed up to 60,000 doses/hour
Changing the dose software with PLC
2. Pneumatic cylinder  
Dosing speed up to 45,000 doses/hour
Changing the dose mechanical
Pressure in the pneumatic network ≥ 6 and ≤10 bar
Air flow (at a pressure of 6 bar and a dosing rate of 5,000 doses/hour) 100 l/hour
Supply voltage / Frequency 220V/ 50Hz
Electrical power consumption 110 W/hour
Overall dimensions including stand 620x1530x2300 mm
Weight of installation without liquid nitrogen 36 kg
Operation mode continuous, 24/7
Ambient temperature from +5˚С to +40˚С
Relative humidity up to 98%