GSM/GPRS module S140 Sintesy

Article:
Price:
Production: Italy
Italy
Description Characteristics

S140 is a medical device used to monitor alarms in medical distribution systems.

The main feature is ability to send alarm messages in case of emergency situations using the GSM network: they can be sent in the form of voice calls, SMS and/or email.

The module can send combination of messages for each alarm event- voice messages, SMS or email - choosing addresses from a list of 8 preset phone numbers.

S140 can operate as a standalone device or can be part of a network of other devices. The device can also be connected to the S200.smart and S300.smartPLC or enter a complex telemetry system.

Power supply 24V, 30VA (max)
Battery external battery can be used
Internal protection Fuse
8 inputs 0-20mA, 4-20mA, 0-10V, 2-10V, 0-5V, 1-5V digital with external/internal power supply
8 programmable digital outputs 24 В; 50 мА
Backlit LCD display 16 characters x 2 lines
Keyboard alphanumeric with 16 buttons
Light signals - green LED - red LED - yellow LED - power supply ON, connection setup - high priority signal high efficiency output - medium priority signal high efficiency output
Sound Emitter Mode double tone, single tone, siren
Temporary depression 1 min max.
Permanent depression using password
Emergency alarm pressure ˃ 70 dB at a distance of 1 m
Operation temperature -10/ +60°С
Storage temperature -20/ +70°С

Популярное

EuroCyl-1000/37 ZX

EuroCyl-1000/37 ZX

EuroCyl-1000/37 ZX gasificator with capacity of 997 liters for transportation and storage of cryogenic liquids (nitrogen, oxygen, argon, carbon dioxide and nitrous oxide). Designed for laboratory and ...
Cryogloves CryoPlus-55-2.1 (size 10)

Cryogloves CryoPlus-55-2.1 (size 10)

Cryogloves CryoPlus-55-2.1 are made of special composite two-component material with polyurethane membrane, completely waterproof. Intended for protection of hands and arms of hands during work with liquid ...
YDS-15-125

YDS-15-125

Dewar flask YDS-15-125 with a volume of 15 liters and a wide neck with a diameter of 125 mm is designed for short-term storage of large biospecimens and low-temperature processing of parts.
YDS-1-30

YDS-1-30

Dewar flask YDS-1-30 with a volume of 1 liter is designed for storing and transporting small-capacity biomaterials manually.
Lab 50

Lab 50

The MVE Lab 50 Dewar holds 50 liters of liquid nitrogen. Used in laboratories and medical institutions.
Cans

Cans

Аluminum holders for  tubes 290 mm long, 10 mm wide. 
You recently watched

YDS-35B-125

A specially designed Dewar vessel YDS-35B-125 with a volume of 35,5 l with additional side and bottom reinforcement for increased safety during transportation and storage of biological samples.