.svg)
Pipe cooling button S187 Sintesy
Article:
Price:
Production: Italy
Description
Characteristics
Sintesy S187 is a button for autonomous control and monitoring of cooling of the cryogenic pipelines, controlled from a cryobank/biobank.
Pressing the button for 5 seconds starts process of cooling down and filling the cryogenic line; when you press and hold the button for 10 seconds, the refueling process stops.
The yellow indicator on the panel indicates the status of the system:
- In standby mode: LED is off;
- Cooling/degassing phase: LED blinks;
- Filling phase: LED is on.
Technical characteristics of S187
| Power supply | 24V |
| Visual indicator | Embedded in the button |
| Installation height from the floor | 100 cm |
Популярное
ECT-3-60/18-37
Cryogenic vertical stationary tanks ECT are manufactured by Chart VRV in Italy and have a wide range of models: volume from 3,000 liters to 60,000 * liters and three versions for 18, 23 or 37 bar maximum ...
AI-250-330-45k
Liquid nitrogen doser AzotInject AI-250-330-45k with the length of the "trunk" of 330 mm is designed to create overpressure and inert atmosphere into bottle at a rate up to 45,000 bottles/hr.
YDZ-15
The YDZ-15 vessel with a capacity of 15 liters, designed for pressures up to 1.5 bar, is used for storing and dispensing liquid nitrogen at a rate of ≥ 2 L/min.
It is intended for both laboratory and ...
PU-510
The withdrawing device PU-510 for transfer liquid nitrogen from Dewar vessels YDS 10 L into another container due to small overpressure. Designed for laboratory and industrial applications.
YDS-10-80-YS
Dewar Vessel YDS-10-80-YS with a volume of 10 liters with additional side and bottom reinforcement for increased safety during transportation and storage of biological samples.
SC 4/3V
The MVE SC 4/3V dewar vessel provides storage of 210 1/2 мл straws , 452 1/4 мл straws and 48 vials for 21 days. Holds 4,3 liters of liquid nitrogen.
