Cryocontroller S110 Sintesy

Article:
Price:
Production: Italy
Italy
Description Characteristics

Sintesy S110 Electronic Unit is a programmable logic controller with a display and control buttons on a DIN rail for a cryobank/biobank basic control and monitoring. It provides process control and tracking parameters as follows: cooling/ventilation of the vacuum insulated line; oxygen concentration, activation of emergency forced ventilation, level control, pressure in cryogenic tanks, etc.

S110 Electronic Unit can operate as a stand-alone device or can be part of a network of other modules. With Sintesy.eagle.S 200.smart, you can also remotely monitor alarm status. Due to the Sintesy software and using the standard PC, all available functions can be programmed.

Power supply 24VAC, 20VA
4 analog outputs 0-20 mA, 4-20 mA, 0-10 mA, 2-10 V, 0-5 V, 1-5 V with external/internal power supply
8 programmable optoisolated digital outputs 24V; 100mA
Backlit LCD display 16 characters x 2 lines
Keyboard alphanumeric with 16 buttons
Light signals
- green LED
- red LED
- yellow LED

- power supply ON, connection setup
- high priority signal high efficiency output
- medium priority signal high efficiency output
Two alarm priority medium/high
Sound Emitter Mode double tone, single tone, siren
Temporary depression no more than 15 min
Permanent depression using password
Emergency alarm pressure ˃ 70 dB at a distance of 1 m
Operation temperature 0/ +60°С
Storage temperature -10/ +70°С

Популярное

SC 3/3

SC 3/3

The MVE SC 3/3 Bio dewar vessel provides storage of 440 straws for 17 days. Holds 3.6 liters of liquid nitrogen.
ECT + RMP

ECT + RMP

Cryogenic gasifiers (ECT + RMP) stationary are assembled on the basis of cryogenic tanks ECT and atmospheric evaporators RMP, which are manufactured by the company Chart VRV in Italy. Gasifiers have a wide ...
YDZ-5

YDZ-5

The YDZ-5 vessel with a capacity of 5 liters, designed for pressures up to 1.5 bar, is used for storing and dispensing liquid nitrogen at a rate of ≥ 2 L/min. It is intended for both laboratory and industrial ...
MVE HE 1539P-190

MVE HE 1539P-190

The MVE HE 1539 P-190 cryogenic storage facility provides stable cryogenic storage of up to 39,200 1.2 / 2.0 ml cryoprobes.
YDS-20-D1

YDS-20-D1

The Haeir YDS-20-D1 Dewar vessel with a capacity of 20 liters is designed for the storage and transportation of liquid nitrogen. It is intended for laboratory and general industrial use.
YDS-3-YS

YDS-3-YS

The YDS-3-YS 3L Dewar flask has a sidewall and bottom layer to provide increased safety during the transportation and storage of biological samples.