ECT-3-60/18-37

Article:
Price:
Production: Italy-USA
Description Characteristics

Cryogenic vertical stationary tanks ECT are manufactured by Chart VRV in Italy and have a wide range of models: volume from 3,000 liters to 60,000 * liters and three versions for 18, 23 or 37 bar maximum operating pressure. Designed for storage and delivery of liquefied atmospheric gases and LNG: liquid nitrogen (LIN), liquid oxygen (LOX), liquid argon (LAR), liquid carbon dioxide (LCO2), liquid nitrous oxide (LN2O) and liquefied natural gas (LNG).

The ECT container is a vertical "vessel within a vessel" design, in which the inner tank and strapping pipes are made of stainless steel, and the outer vessel (casing) is made of carbon steel with a strong, environmentally friendly coating in accordance with the requirements of industry standards. The cavity between the vessels has a vacuum-perlite insulation to minimize the evaporation of cryogenic liquid due to heat flows from the environment. Thanks to Chart Vacuum Technology ® , ECT cryogenic tanks have the best insulation system in the industry and excellent technical characteristics. The tanks have an attractive European design, are equipped with shut-off and control and safety valves, and instrumentation and control equipment of the world's leading manufacturers.

Control and measuring devices on ECT containers have a Certificate of Approval of the type of measuring instruments (Metrological Certificate), which means that they are approved for use in the territory of the Russian Federation and you will not have any difficulties when passing the annual verification of measuring instruments.

Developed in accordance with the requirements of the European standard EN 13458 and Directive 2014/68/EU and meet the requirements of the Technical Regulation of the Customs Union TR CU 032/2013 "On the safety of equipment operating under excessive pressure".

On request, the tanks can be equipped with a telemetry system (4...20mA) for remote monitoring of the liquid level and pressure in the tank. All the necessary adapters for refueling from a gas station or from a transport tank of the TTC type are available.

The delivery package includes full technical documentation in Russian, including the pressure vessel Passport and the Operating Manual.

* Larger containers are also available on request.

Model Total volume Outer diameter Empty vessel weight on 18 / 22 / 37 bar Height
ECT litr mm kg mm
ECT 3 3 300 1 680 2 300 / 2 700 / 2 000 3 800
ECT 6 5 950 1 680 3 500 / 3 700 / 4 200 5 800
ECT 10 10 600 2 200 5 600 / 5 900 / 6 900 5 750
ECT 20 20 850 2 200 9 600 / 10 000 / 11 900 9 750
ECT 30 29 450 2 780 13 000 / 14 000 / 16 000 8 750
ECT 40 40 900 3 000 16 300 / 18 000 / 20 300 9 950
ECT 50 51 200 3 000 19 000 / 21 000 / 24 500 11 900
ECT 60 61 600 3 000 23 000 / 25 000 / 28 000 13 900

Популярное

YDS-10-90

YDS-10-90

Dewar flask YDS-10-90 with a volume of 10 l for storing biological samples or liquid nitrogen for a long period of time in a static state.
YDZ-50

YDZ-50

The YDZ-50 vessel with a capacity of 50 liters, designed for pressures up to 1.5 bar, is used for storing and dispensing liquid nitrogen at a rate of ≥ 3 L/min. It is intended for both laboratory and ...
DOH-BOX-4300

DOH-BOX-4300

Dohmeyer DOH-BOX-4300 Cryo-Freezer with an internal volume of 397 liters has been specifically designed to meet the most stringent requirements for freezing, surface freezing or cooling food.
XC 22/5

XC 22/5

The MVE XC 22/5 Bio dewar vessel provides storage of 3666 straws and 810 vials for 40 days. Holds 22.4 liters of liquid nitrogen.
MVE YDS-35L

MVE YDS-35L

Dewar vessel MVE YDS-35L, volume 35,5 l  for transportation and storage of liquid nitrogen.Designed for laboratory and industrial use.
YDS-10-80-YS

YDS-10-80-YS

Dewar Vessel YDS-10-80-YS with a volume of 10 liters with additional side and bottom reinforcement for increased safety during transportation and storage of biological samples.